WEN 4.3 Amp Corded 4 in. x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
$127.56
Easily sand, smooth and remove all the jagged edges and splinters on your wood with this WEN Corded Belt and Disc Sander with Cast Iron Base.
In stock
Description
Remember when you needed a versatile and reliable sander. The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 Amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4 in. x 36 in. belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0° to 90° to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6 in. side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 in. dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a 2-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
- 2-in-1 sanding machine includes both a 4 in. x 36 in. belt and a 6 in. x 6 in. disc
- Belt tilts anywhere from 0° to 90°
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
- Backed by a 2-year warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 39 lbs |
|---|---|
| Dimensions | 22.25 × 11.00 × 12.50 in |
| Amperage (amps) | 4.3 A |
| Belt length | 36 |
| Belt width | 4 |
| Color Family | Black |
| Condition | New |
| Cord Length (ft.) | 6 |
| Corded Tool Type | Belt Sander |
| Cordless/ Corded | Corded |
| Dust collection type | Port |
| Maximum speed (ft./min.) | 3600 |
| Minimum speed (ft./min.) | 1900 |
| Model | 6502T |
| Power Tool Features | Lock On Switch, Lockout Power Switch |
| Tools Product Type | Power Tool |
| Variable Speed | No |
Reviews (79)
79 reviews for WEN 4.3 Amp Corded 4 in. x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Model# EB4424
Sanders
Model# R25011
Sanders
Model# 9903
Sanders
Model# 9924DB
Sanders
Makita 3 Amp 5 in. Corded Palm Grip Random Orbital Sander with Dust Bag, Hard Case
Model# BO5030K
Sanders
RIDGID 3 Amp Corded 5 in. Random Orbital Sander with AIRGUARD Technology
Model# R26011
Rhett Ondricka (verified owner) –
Great value really gets the job done highly recommended
Scotty Hammes (verified owner) –
The sander bogs down and stops with little force applied. 4.3 amps is too weak for a belt sander of this design. It’s inexpensive that’s true but it wouldn’t take much to improve the strength of this machine. I’ve worked on electrical equipment and mobile electric power plants in the Navy for 20 yrs. So I’m no dummy. You put out a cheap product that barely gets the job done.
Madeline Weimann (verified owner) –
Works fine.
Raoul Langosh (verified owner) –
This is a great sander for $100 I think it works very well.
Shea Hudson (verified owner) –
The tool arrived timely and I’ve used it for its intended purpose – for several weeks now – on shoe adjustments (read, orthopedic): incl. including sole sheets, shoe lasts, and a shoe press. Setup was a breeze, as I worked, minor belt adjustments were necessary. Both belt and disk worked well
Geovany Cole (verified owner) –
works really well. He is very happy with the purchase.
Chaz Bednar (verified owner) –
Great belt sander for small knife making and small wood working projects.
Deonte Mohr (verified owner) –
Wen band saw, sanders, drill press etc. I have no complaints and they are reasonably priced. I will absolutely continue to buy their products
Eugene Marvin (verified owner) –
Plenty of power for my DYI projects! Perfect for me at a good price!
Adelia Bechtelar (verified owner) –
This sander is a good product considering all of the overall features and price. It is a budget friendly model that operates well. I found two problems with this machine. The first is a slight inconvenience and involves the hex bolt that allows adjustment (raising/lowering) of the belt sander bed. When the steel stop/arm is attached as recommended it slightly obscures the hex head bolt while raising the belt bed. You have to remove the allen wrench then maneuver it back into the bolt head, removing and reinserting several times to tighten or loosen. The second problem that seems to persist in all of these lower priced belt/disk sanders is the attachment and adjustment mechanism of the disk sanding table. It is sloppy, weak and difficult to adjust properly. Also the bolt that is used to tighten the table to the sander has a small plastic star head grip that is too small for proper hand tightening. Despite these drawbacks the sander works well. It is easy to change the sanding belt and not too hard to replace the disk. I recommend it for those DIY people who need an entry level belt/disk sander.
Jennie Collins (verified owner) –
I am well satisfied . Am well satisfied with Sander. Plenty of power,heavy,dosen’t slide around when I’m using it. highly reccomend.
Cleora Rippin (verified owner) –
Good price –worth the money–made solid and compact
Graciela Herzog (verified owner) –
Great sander for the money. Good design in making replacement of the belt & disc easy as compared to the Harbor Freight one that I mistakenly purchased.
Jacinto Davis (verified owner) –
Nice time saver.
Wilfred Witting (verified owner) –
It sands. Which is what I bought it for. Changing belts it super easy and the dust port does a decent job of collecting from the belt but not so much from the disk. There is a fair bit of vibration that I haven’t been able to solve but at this price I can live with it. I added a place to hang the allen key so I wasn’t chasing it when I needed to change belts or adjust the angle. Also there is no way I’ve found to adjust the full length belt tension in case you buy 36″ belts that are just a bit longer than they are supposed to be and they flap. Overall it does what its designed to do so if you’re cheap like me and need one, buy it. It works.
Bradly Boehm (verified owner) –
When assembling the disk sander plate, I found that the plate would tighten, but would have a small drop when pressure was applied causing the vertical adjust to loose a degree or so. The boss that holds the plate was slightly smaller than the hole it was supposed to fit into. I used a small piece of shim stock to tighten that contact into the hole and the plate no longer drops when leaned upon. Now, a 90 degree adjust of the plate stays at 90 degrees.Other than that, the disk and belt sander work flawlessly.
Chaz Fisher (verified owner) –
Good little sander. Aligning the belt was very easy.
Felipa Blick (verified owner) –
Performed what I wanted perfectly.
Kennith Wilderman (verified owner) –
My 2nd WEN product! Very please! It works as it should! Very little vibration! Motor is stout! I like it
Edmund Prosacco (verified owner) –
It’s a perfect size for home projects. Very good dust control. Easy to change sanding belts. The adhesive sanding disc can be a hassle to get off a hook and loop system would be much easier.