WEN Oscillating Belt and Spindle Sander
$204.74
Polish your concrete floor to spectacular beauty and abrasion with this WEN Oscillating Belt and Spindle Sander.
In stock
Description
Remember when you were the king of the twist. Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped work pieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8 in. stroke. This package includes 5 different spindle sanding sizes (1/2 in., 3/4 in., 1 in., 1-1/2 in. and 2 in.) and one 4 x 24 in. belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 ft. per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 in. dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45° to help take on angled edges and surfaces. This sander also comes with 6-pieces of 80-Grit sandpaper: 1 for the belt and 5 for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Its time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired. Remember WEN.
- Features 1/2 in., 3/4 in., 1 in., 1-1/2 in. and 2 in. sanding drum sizes and one 4 in. x 24 in. belt
- Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
- 3.5 Amp motor oscillates the belt and spindle 58 times per minute with a 5/8 in. stroke
- Onboard storage maintains organization of all accessories and sandpapers
- Includes a beveling work table, 5 throat plates, 4 rubber sanding drums, 1 belt sanding attachment and 6-pieces of 80-Grit sandpaper (1 for each size spindle/belt)
- Backed by a 2-year warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 27 lbs |
|---|---|
| Dimensions | 22.00 × 17.80 × 18.50 in |
| Amperage (amps) | 3.5 |
| Minimum belt sanding speed (ft./min.) | 1575 |
| Variable Speed | No |
| Tools Product Type | Power Tool |
| Spindle table length (in.) | 16 |
| Reconditioned | No |
| Power Tool Features | Lockout Power Switch, No Tool Belt Change, No Tool Disc/Pad Change |
| Portability | Bench |
| Model | 6524 |
| Maximum belt sanding speed (ft./min.) | 1575 |
| Belt length (in.) | 24 |
| Dust collection type | Port |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | Black |
| Bench & Stationary Tool Type | Belt & Spindle Combo Sander |
| Belt width (in.) | 4 |
| Belt table width (in.) | 8.5 |
| Belt table length (in.) | 16 |
| Voltage (volts) | 120 |
Reviews (60)
60 reviews for WEN Oscillating Belt and Spindle Sander
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Makita 3 Amp 5 in. Corded Palm Grip Random Orbital Sander with Dust Bag, Hard Case
Model# BO5030K
Sanders
Model# MS2000
Sanders
Model# DS321 1
Sanders
Model# GA7911
Astrid Lesch (verified owner) –
This is an inexpensive tool. It appears to be made primarily of injection-molded plastic with some type of cast metal adjustable angle table. Being fairly lightweight it vibrates considerably while in operation and should be bolted down to prevent it from walking off of your work table.If the shaking does not bother you it does seem to do the job. How long it will last is anybody’s guess.
Laila Ebert (verified owner) –
To my knowledge the manual instruction is not completed and easy to follow, as far as the machine goes I am happy.
Emilio Smitham (verified owner) –
This works well. It does what you expect of it. The knurled nut atop the belt attachment spindle self tightens too much to be hand removed. Pliers are required. Assembly instructions are fair. There is a white washer below the spindle drum that I can’t seem to find its proper use in the instructions. Overall, worth the money. Go for it!
Kailee Gislason (verified owner) –
The oscillating sander is very easy to assemble and switch between belt and spindles. It’s seem to do very good job
Anastasia Hintz (verified owner) –
Easy set up light. Big platform works great
Shyanne Wiza (verified owner) –
I haven’t used it for any great amount of time yet, but so far it’s great. It appears to have all the features of my neighbor’s Ridgid EB4424, but with a (important to me) smaller footprint and lower price. Even so, the belt size and all the spindles are the same. It’s a fine sander.
Ottis D’Amore (verified owner) –
I did not know the belt sander osculated also. Not exactly what I was looking for but is workable.The sander is a nice one and works well.
Graciela Towne (verified owner) –
Love it
Lavon Abernathy (verified owner) –
The oscillating belt and spindle sander works as described. Did not require much setup, basically unpack and the system is ready to go. The dust collector port connected to a vacuum system works really well. The only complaints are that the sander is noisier than I anticipated and the belt centering is a bit touchy.
Dillon Marks (verified owner) –
excellent equipment !
Keegan Hirthe (verified owner) –
The sander works great. Shipping was fast and the sander was packed very well. Set up was fast and easy. Once I started to use it, it became very noticable this sander is very noisey. It is allot noisier then the Ridgid it replaced. Another thing that I didn’t notice until I set it up, there is no miter slot on the table. That is quite annoying. It should have one for squaring pieces of your projects. The dust collection port is way too small. It should be 2″ or bigger.Other then those three cons I would say it is a good machine.
Kathlyn Ziemann (verified owner) –
Well built for a low cost machine. Mostly plastic, but solid, not flimsy.
Marques Torphy (verified owner) –
Works great! Makes sanding so much easier and faster
Laurence Koss (verified owner) –
Wish i had it years ago. Works grate.
Noel Grimes (verified owner) –
was xmas present son does wood work will love it
Shawn Wehner (verified owner) –
It does eveything i need it to
David Koepp (verified owner) –
Works great
Rhiannon Lebsack (verified owner) –
The choice was between this one and the Rigid model – which is the one I thought I needed due to the larger table on it. I honestly have not even thought about the Rigid model since this one arrived. The Wen is fantastic in every way! Zero regrets, and saved me some money which went toward the purchase of a Wen drill press that also turned out to be very well-made. With the quality you get in this price range, I may be filling my woodworking shop with even more Wen tools.
Newton Reichert (verified owner) –
Seems to work great the little I have used it so far, price was right and shipped right to my door.
Nakia Rempel (verified owner) –
Easy to assemble. Straight out of the box we were cranking out work. Great motor, didn’t bog down with the belt sander under a heavy load. Easy switch to the spindle and the 1/2 inch spindle is great for the details. Storage for the many assorted attachments is engineered for rapid change out.