WEN 13 in. 15 Amp 3-Blade Benchtop Corded Thickness Planer
$342.94
Finish your all toughest works easily with the selection of this WEN Benchtop Corded Thickness Planer. Forward and reverse switch.
In stock
Description
Remember when you brought those old jagged boards back to life. The WEN 13 in. 3-Blade Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15 Amp motor provides over 25,500 cuts per minute at a 26 ft. per minute feed rate. Plane boards up to 13 in. W and 6 in. T with ease. The onboard planning gage helps inform users about the amount of material being removed during each pass. Combine that with the heavy-duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob varies each pass to take off anywhere from 0 in. to 3/32 in. of an inch. The fan-assisted dust port removes chips and sawdust from the workpiece and blasts them out of the way. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planning. Easily mount the planer to a work surface or stand using the predrilled base holes. Repurpose old wood or make a set of boards flush with the WEN 13 in. 3-Blade Benchtop Thickness Planer. And because its a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.
- Onboard material removal gauge informs users about the cutting depth of each pass
- Plane boards up to 6 in. T and 13 in. W
- 15 Amp motor generates 25,500 cuts per minute at a 26 ft. per minute feed rate
- 3-blade design makes easy work out of even the hardest of woods
- Fan-assisted dust port removes sawdust from workpiece
- Backed by a 2-year warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 66 lbs |
|---|---|
| Dimensions | 24.80 × 16.14 × 18.90 in |
| Amperage (amps) | 15 A |
| Bench & Stationary Tool Type | Planer |
| Blade(s) Included | Yes |
| Color Family | Multi-Colored |
| Color/Finish | Orange / Black |
| Condition | New |
| Maximum Board Thickness | 6 |
| Maximum Speed (rpm) | 8500 |
| Maximum cut depth (in.) | 0.09375 |
| Minimum cut depth (in.) | 0.09375 |
| Model | 6552T |
| Number of Cutting Blades | 3 |
| Portability | Bench |
| Tools Product Type | Power Tool |
Reviews (79)
79 reviews for WEN 13 in. 15 Amp 3-Blade Benchtop Corded Thickness Planer
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Model# R24012
Woodworking Tools
Model# R4331
Woodworking Tools
Jet 1/2 HP Benchtop Mortise Machine 115-Volt 1/2 in. Capacity JBM-5
Model# 708580
Woodworking Tools
Model# 5625-20
Woodworking Tools
Model# DW734
Woodworking Tools
Model# DW616
Woodworking Tools
Bosch 11 Amp Corded 1-5/16 in. Single-Speed Fixed-Base Router Kit (6 Accessories)
Model# 1617
Woodworking Tools
Model# 708620B
Christa Hills (verified owner) –
Works Great
Irving Gaylord (verified owner) –
Works great. Great product for the money
Sam Gleichner (verified owner) –
For the short time I’ve used it, the planer has worked well. You do have to manage the snipe by picking up the board a bit as it feeds in and out, but that is with all of these type planers. Also, if I have my shop vac on when this is on and they are on the same outlet, the planer bogs down and the planer eventually shuts down mid cut. I just have to plug my shop vac into another outlet (circuit).
Lynn Bartell (verified owner) –
Worked great right out of the box.
Jena Klocko (verified owner) –
I choose to spend a little more for the 3 blade model and I have been very pleased. I have run several 6/4, 9 inch wide hard maple and 4/4, 8 inch wide cherry boards through it at a quarter turn each pass. It worked great. It even came with reverseable blades.
Myles Gorczany (verified owner) –
very easy to set up and use. I believe this 3 blade unit runs and cuts much easier and smoother then the 2 blade units in this category, the few extra dollars for this unit is worth the purchase, this is an excellent machine and easy to store when finished using.
Juvenal Fahey (verified owner) –
Works very well. I have not used it a lot, but it has worked quite well. The only problem is that the part which hooks up to the shop vac tends to get clogged fairly easily. I especially like the gauge which shows how much is being taken off with each pass.
Ahmed Kuhic (verified owner) –
I received it with no problems and I opened it up n it was so simple to set up. I put some old wood in and a couple of of passes n brand new wood. A great planer.
Muriel Rippin (verified owner) –
Overall good machine. I wish it had a bit more power but for the price it has been incredible so far and it has gotten quite a bit of use.
Royce Spinka (verified owner) –
Nice tool ! … Easy to set up and use, and leaves a good finish. Just dont take to much off at once. Also, I HIGHLY RECOMMEND fully reading and ADHERING to the advisement in the manual regarding ONLY cutting boards longer than 14.5″ and NOT planning end or cross grain. I destroyed my blades on some log rounds first time out and had to replace them !
Coralie Reichel (verified owner) –
Put it through its paces with some 8/4 mahogany. The surface is much better, as expected for a three-blade machine. Snipe is also reduced to under 2″ with a total loss from both sides of only about 1/128″. The infeed indicator showing thickness removed (approximate) takes some getting used to, but causes no problems. Overall an excellent machine for this price.
Dustin Armstrong (verified owner) –
Makes a very clean cut, it is very precise.
Raven Von (verified owner) –
Machine works good although blades came with a neck in them
Chandler Mitchell (verified owner) –
10% off coupon sealed the deal
Declan Kub (verified owner) –
Everything works as it should. Just can’t get rid of snipe tried everything still have a little snipe but I just cut it off and continue on.
Thelma Prosacco (verified owner) –
Great planer for the price. Well put together, light enough to move around. Noise level is tolerable unless you attempt to plane too much at once. When the job is done, just give it a good blowing off with the air hose. It shipped on time, maybe a day early. Measurement guide easy to figure out. Very happy
Nyasia Crona (verified owner) –
Great price and the machine is quality built. Factory installed blades are not the best. I would suggest replacing them.
Dulce Daniel (verified owner) –
Works well. Planned black walnut for several hours straight. Dust/ shavings port does clog up so keep an eye on that.
Cynthia Medhurst (verified owner) –
Out of the box,some assembly, plug in, switch on, worked great, smooth plane, large shop vac works great with discharge. PLEASED WITH IT.