WEN Heavy Duty 500 lbs. Capacity Universal Mobile Base for Tools and Machines
$51.03
Add richness and value to your cabinetry work with the selection of this affordably priced WEN Heavy Duty Capacity Universal Mobile Base for Tools and Machines.
In stock
Description
Remember when you could move your tools freely around the wood shop? Get the most out of your work space with the WEN Heavy Duty 500-Pound Capacity Universal Mobile Base. With 2 fixed casters and 2 swivel casters, this versatile dolly is the perfect companion for band saws, table saws, tool chests, gun cabinets, safes, lathes, planers, jointers, drill presses, sanders, and more. This versatile mobile stand fits both rectangular and square bases. The square configuration adjusts from 11.8 x 11.8 in. up to 35.4 x 35.4 in. in size while the rectangular configuration goes all the way up to 51.2 x 19.7 in. Ball bearings inside of the wheels provide smoother travel and a longer lifespan when compared to other mobile bases available on the market. Foot-locking brakes prevent users from needing to bend down to lock and unlock the stand. Plus, our compact design minimizes the bases invasiveness, increasing the height of the tool by a mere 7/8 in. And because its a WEN product, your mobile base comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when your tools could easily roll wherever you wanted them. Remember WEN.
- Turn your stationary tools into mobile machines, helping you to get the most out of your work space
- Perfect for band saws, table saws, tool chests, cabinets, safes, planers, sanders, jointers, drill presses and more
- Fits square base configurations anywhere from 11.8 by 11.8 in. up to 35.4 by 35.4 in.
- Fits rectangular bases up to 51.2 x 19.7 in. in size
- Features 2 fixed casters, 2 swivel casters, and 2 ft. locking brakes
- Only increases the height of the tool by 7/8 in.
- Backed by a 2 year warranty
Additional information
| Weight | 15.5 lbs |
|---|---|
| Dimensions | 18.90 × 7.70 × 3.70 in |
| Bench & Stationary Tool Type | Accessory |
| Ideally Used With | Stationary Band Saws |
| Model | MB500 |
Reviews (76)
76 reviews for WEN Heavy Duty 500 lbs. Capacity Universal Mobile Base for Tools and Machines
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR42102
Woodworking Tool Accessories
Model# DR34128
Woodworking Tool Accessories
Model# DR04132
Woodworking Tool Accessories
Model# DR62XXX
Woodworking Tool Accessories
Milescraft 1-1/2 in. Horizontal Sign Making Letter and Number Set (42-Piece)
Model# 2202
Woodworking Tool Accessories
Model# DR64100
Woodworking Tool Accessories
Model# DR16116
Woodworking Tool Accessories
Model# DR34124
Melissa Lehner (verified owner) –
Very nice product, heavy duty. Instructions are sketchy but if you take your time you will be fine.
Terrell Prohaska (verified owner) –
Easy to assemble & well made. Handles my “old school” Craftsman Table Saw (H-E-A-V-Y) and makes moving it around the workshop a breeze!
Destin Heidenreich (verified owner) –
I purchased this mobile base to transport my radial arm saw, which is pretty heavy. No issues with the assembly; the instructions and pictures were easy to follow and complete. All the paint was good, all the pieces were there. Packaging looked good. By the way, I found it beneficial to read the first few pages of the booklet, especially if you have a drill press or top heavy tool to use with the mobile base. I think the product is definitely beefy enough for my radial arm saw – it feels solid. It moves pretty nice and the wheel/pad action is good – but take time to adjust the pad height correctly so when you let the base down, your wheels are not holding any of the weight. The base should sit firmly on the pads. Here’s a couple of time savers for assembly: 1) I used a 10mm nut driver on my low speed motorized screwdriver for the numerous 10mm bolts/nuts. Then, used two 10mm wrenches to tighten them down. 2) Be aware, the side pieces can be off a few degrees if you tighten the bolts without checking to see if the small (inner) piece is centered in the larger (outside) piece. Just loosen the bolts and center the pieces and tighten down. 3) When assembling the lift wheels, do not over tighten the bolts holding both the orange levers. They should be snug, but if you crank them down, the lift will not work because that lift handle needs to smoothly operate.
Damian Ledner (verified owner) –
Great to be able to wheel around my table saw.Easy to build and make sure to build it around your tool.
Hermina West (verified owner) –
Great addition to my shop
Amanda Hills (verified owner) –
A nice, sturdy set of wheels. Easy assembly, quality parts. A good buy.
Deja Kub (verified owner) –
User this for my band saw. Worked great. Easy to move around
Charlotte Kris (verified owner) –
Works great, wish I had purchased years ago.
Clare Walsh (verified owner) –
Easy to assemble and strong.
George Grady (verified owner) –
easy to assembly well built
Penelope Wilkinson (verified owner) –
Will by another one..worked great
Manuela Hahn (verified owner) –
I used the Wen mobile base for my old Craftsman table saw. Assembly was strait forward and wound up fitting my saw very well after a little a little adjusting. It is sturdy and works well. The price was reasonable too.
Arvel Marks (verified owner) –
After reading the previous reviews,I purchased this item. Learning from others mistakes I found it easy to assemble and love the end product. Purchased two one for my drill press stand snd one for my Bandsaw stand.
Arely Kuhic (verified owner) –
Mobile base is great, exactly what I needed for my Band Saw.Only thing that would be better is the instructions.I am mechanically inclined and find things pretty easy to put togetherBut for a rookie they may have a little problem, Instructions should showmore pictures of pieces going together.It seems sturdy, moves my saw very easily and smoothGreat addition for my cramped space,
Vivienne Hayes (verified owner) –
Works great
Elvis Schoen (verified owner) –
The base is sturdy and rolls well but there is no simple way to attach the legs of a tool stand. There is a bolt hole in the bottom of the corners of the base but the stands I have do not have a similar place to attach on the legs. I will figure something out but it is frustrating.
Joshuah Schamberger (verified owner) –
Loved this base. I put it on my table saw and have zero complaints besides it requires a little fine tuning to get everything right when putting it together. Nothing too bothersome.
Manuela Schumm (verified owner) –
The rollers work well and is a big improvement over the Sears stand that I bought with the table saw 30+ years ago. It would be even better with swivel casters all 4 sides, but it works well with just 2. It has added significant stablity to the base. The table saw is probably 200 lbs + so I didn’t test with 500.
Tressa Feest (verified owner) –
This is a heavy duty product that seems like it will perform as advertised. It has a TERRIBLE assembly manual. There are black and white photos of key assembly details, taken of black parts, against a dark background. I suggest that you look at the photo used to sell it, and look ahead in the photos in the manual, before getting too far into assembly.
Liliane Runolfsdottir (verified owner) –
I have two of these mobile bases. They were easy to assemble, and functions perfectly. Price point was lower than others that I investigated. I used one for my Porter Cable drill press and the other for my Jet bandsaw, both tools are extremely heavy: with the base installed i’m able to move them around very easily.