WEN 1/2 in. Flush Trim 3-Wing Carbide Tipped Router Bit with 1/2 in. Shank
$20.66
Leave clean, burr-free holes on your materials with the selection of this WEN #10 Flush Trim Carbide Tipped Router Bit with Shank.
In stock
Description
Remember when your bits could handle the toughest materials. Add some shape into your edges with the WEN Professional-Grade High Speed Steel Carbide-Tipped Router Bit series. These reliable and durable heat-treated bits feature extremely sharp tungsten carbide blades that slice through even the toughest of woods. Our flush trim profile combined with the three-wing design replicate complex edges and make flush surfaces in your workpieces. Features a 1/2 in. Dia, a 1-1/2 in. cutting length, a 3-19/32 in. overall length, a 1/2 in. Dia shank and a maximum RPM of 24000. And if this bit doesn’t cut it, check out the rest of our line of professional router bits, available in a wide variety of profiles and sizes. With WEN by your side, any job is within reach; from surface trimming to unique cabinetry, simple dados to decorative edges, you’ll be able to handle it all. Remember when you stepped your carpentry up a notch. Remember WEN.
- Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge
- Features a 1/2 in. Dia, a 1-1/2 in. cutting length, a 3-19/32 in. overall length, a 1/2 in. Dia shank and a maximum RPM of 24000
- Flush trim profile helps replicate complex edges and create flush surfaces
- Part of the WEN professional grade high speed steel carbide tipped router bit series
- 3-wing design maximizes chip clearance for jobs requiring faster cuts
Additional information
| Weight | 0.45 lbs |
|---|---|
| Dimensions | 9.50 × 7.25 × 0.50 in |
| Bit Material | Carbide |
| Cut Diameter | 1/2 |
| Individual/Set | Individual |
| Model | RB502FW |
| Number of Flutes | 0 |
| Number of Pieces | 1 |
| Product Length (in.) | 3-19/32 |
| Router/planer type | Trim |
| Self-Feeding | No |
| Shank Diameter (in.) | 1/2" |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (5)
5 reviews for WEN 1/2 in. Flush Trim 3-Wing Carbide Tipped Router Bit with 1/2 in. Shank
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Milescraft Design/InlayKit Complete Kit for Routing Designs and Inlays
Model# 1207
Woodworking Tool Accessories
Model# DR04108
Woodworking Tool Accessories
Bosch 27 in. x 18 in. Aluminum Top Benchtop Router Table with 2-1/2 in. Vacuum Hose Port
Model# RA1181
Woodworking Tool Accessories
Model# DR30110
Woodworking Tool Accessories
Model# DR34124
Woodworking Tool Accessories
Model# DR64100
Woodworking Tool Accessories
Milescraft Sign Crafter Complete Sign Making Router Jig Template Kit
Model# 1206
Woodworking Tool Accessories
Model# DR16116
Blaze Olson (verified owner) –
The router bit was super sharp and I noticed right when I opened the small case for it. It worked great for a countertop job I was doing and the wheel bearing on it rolls really smooth and glided really good. The roller is really flush with the actual cutting it does and I even used it on a jig and it didn’t mess up my jig. I’ve done a couple jobs with it and it’s still sharp. Really trimmed up nicely anything I needed it to. The shank and everything is great and I didn’t have any problems doing anything it was intended for so far.
Jaylon Conroy (verified owner) –
I am very surprised with the quality of this WEN flush trim bit! The carbide blade are VERY sharp and straight which means minimal or no sanding needed depending on your work piece. The bearing rolls easily and has zero wobble. The bearing is not sealed so there is a chance that small particles can get in there and cause it to jam up eventually, but that should not deter you from buying it. For the quality you’re getting for the price, this is an excellent buy. Highly recommended.
Wilburn Bruen (verified owner) –
Three (3) carbide cutting edges reduce vibration and wood burn.The 1/4″ shank is precision ground and fit my router collet easily and stays secure. I only buy carbide bits as they last many times longer than standard steel.I like the full 1″ flute length. It makes adjusting easier and allows for single pass trimming and pattern cutting. When it comes to pattern cutting the 1/2″ diameter bit smoothly cuts what the installed bearing follows. Great for rounding over corners with corner templates. Also perfect for trimming formica edges in table tops as the carbide easily stands up to constant use.Great for edge planning boards before glue up to create larger boards.
Joey Dibbert (verified owner) –
This 1/2 IN.FLUSH TRIM 3-WING CARBIDE TIPPED ROUTER BIT WITH 1/.4 IN. SHANK is a quality router bit that any woodworker would be proud to add to their Router Bit collection. On first inspection you will notice the “Attention To Detail” in the grind of the Carbide tipped blades on this router bit. It is very Sharp and honed smooth right out of delivery/storage tube and there are no rough grind markings anywhere on the blade edges. I highly recommend this product. eyedaddy
Claude Kuphal (verified owner) –
The Wen 1/2 inch flush trim router bit has worked well for my trimming needs. The professional -grade high speed steel carbide tipped router bit has stayed sharp after many uses. The cut was exact and flush. I have used many other types of router bits and this works just as well and is less expensive. I do like the three wing design as it gives a much better finish.