WEN 8 in. x 3/4 in. Crimped Steel Bench Wire Wheel with Arbor Adapters
$10.84
Replace your blasters worn or damaged nozzles with the selection of this WEN Crimped Steel Bench Wire Wheel with Arbor Adapters
In stock
Description
Remember when you could round out those sharp edges. Take on build-up, smooth out surfaces, deburr jagged edges and remove rust all with the WEN 8 in. Crimped Wire Wheel. Featuring a versatile arbor and a max RPM of 4500 rotations per minute, this wire wheel comes machine-balanced for smooth operation and even performance. The 0.011 in. steel wires easily strip off rust and smooth out welds. The 5 included arbor adapters help ensure a proper fitting with the majority of bench grinders on the market, allowing this wheel to function with a 1-1/4 in., 1 in., 7/8 in., 3/4 in., 5/8 in. and 1/2 in. arbor. This wire wheel also acts as the perfect companion for the WEN 4280 Variable Speed Bench Grinder, the WEN 4282 8 in. Bench Grinder, and the WEN 4286 Slow Speed Bench Grinder. However, our arbor adapters also allow compatibility with nearly every 8 in. bench grinder on the market. Remember when you could remove rust, deburr jagged edges, and clean metal all with 1 versatile wheel. Remember WEN.
- Measures in at 8 in. in diameter with a 3/4 in. W and 0.011 in. steel wire bristles
- Includes 5 arbor adapters for compatibility with 1-1/4 in., 1 in., 7/8 in., 3/4 in., 5/8 in., and 1/2 in. bench grinder spindles
- Machine-crafted design provides balanced performance for maximum consistency during operation
- Compatible with the entire line of WEN 8 in. bench grinders
- Universal design fits nearly every 8 in. bench grinder on the market
Additional information
| Weight | 1.7 lbs |
|---|---|
| Dimensions | 8.20 × 8.20 × 1.60 in |
| Abrasive Material | Steel |
| Application | General Purpose |
| Arbor Size | 1-1/4 inch, 1-inch, 7/8-inch, 3/4-inch, 5/8-inch, and 1/2-inch |
| Kit | No |
| Model | WW8058 |
| Package Quantity | 1 |
| Power Tool Accessory Type | Sanding/Grinding/Polishing Accessory |
| Product Length (in.) | 8 |
| Sanding, Grinding and Polishing Accessory Type | Grinding/Cut-Off Wheels |
| Wheel Diameter (in.) | 8 |
Reviews (10)
10 reviews for WEN 8 in. x 3/4 in. Crimped Steel Bench Wire Wheel with Arbor Adapters
Only logged in customers who have purchased this product may leave a review.
Related products
Abrasives
DIABLO 4-1/2 in. x 5/8 in. 50-Grit Grinder/Sander Conversion Kit
Model# DCP045VGPS01G
Abrasives
DIABLO 5 in. Refinishing Sanding Disc Project Pack with Hook and Lock Backing (7-Piece)
Model# DCD050VFNH07G
Abrasives
Avanti Pro 4-1/2 in. x 5/8 in. -11 in. Non-Woven Quick-Strip Disc
Model# PNW045STRB01G
Abrasives
DEWALT 4 in. x 1/4 in. x 5/8 in. General Purpose Metal Grinding Wheel
Model# DW4419
Abrasives
DIABLO 4-1/2 in. 60-Grit Steel Demon Grinding and Polishing Flap Disc with Type 29 Conical Design
Model# DCX045060N01F
Abrasives
DEWALT 4 in. x 1/8 in. x 5/8 in. General Purpose Metal Cutting Wheel
Model# DW4418
Abrasives
Model# DCP040VGPS01G
Elmo Wunsch (verified owner) –
This little wheel worked flawlessly on my project. Great construction and balancing
Therese Leuschke (verified owner) –
Quality Wire wheel worth the money.
Leopold Koepp (verified owner) –
This wire wheel is a very good tool for a 8 in grinder. My Dewalt has a 5/8 in arbor shaft and this wheel kit comes with several adapter sizes. I like the brass colored steel brush wires just because it looks good and may add some rust protection. The brush seems well secured to the center steel crimped brush holder. Wire brushes that are revolving at high speed lose little wires while in use and it is important to always wear eye protection with grinders.
D’angelo Blanda (verified owner) –
This wire wheel is a great added tool for my bench grinder. It is 8 inches by 3/4 inches. It can easily be attach to 1/2″, 5/8″, 3/4″, 7/8″ and 1″ arbors. Chose the right size from the included adapters. This wire wheel is made of brass wires and is well made by Wen. Operates up to 4500 RPM. Be sure to wear eye protection, to prevent pieces of dirt and rust from getting into your eyes.
Eduardo Renner (verified owner) –
While this wire wheel looks as if it is made of brass. It is in fact steel. The first thing I noticed was the really large arbor hole. Then I saw the arbor adaptors. At first I was not impressed with them being made of plastic. But I must admit that when they are properly installed they hold up and work very well. The adaptors come in five different sizes as to fit most any grinder. Tried the wheel on an old crusted up wrench. And that went so well that I just went ahead and de-crusted anything else I could find. This is a wire wheel that I can recommend. The people at WEN have their act together on this product.
Sophie Grady (verified owner) –
Wire wheel worked good. Have not had a chance to use for any length of time.
Olga Gerhold (verified owner) –
This wire wheel is a great added tool for my bench grinder. It is 8 inches by 3/4 inches. It can easily be attach to 1/2″, 5/8″, 3/4″, 7/8″ and 1″ arbors. Chose the right size from the included adapters. This wire wheel is made of brass wires and is well made by Wen. Operates up to 4500 RPM. Be sure to wear eye protection, to prevent pieces of dirt and rust from getting into your eyes.
Sven Denesik (verified owner) –
Brass plated steel wire. I like the brass plating as we live in an environment that causes bare steel wire to rust fairly quickly.
Jolie Murphy (verified owner) –
I own the Wen 4282 model Bench Grinder purchased at Home Depot, and this wire wheel is a nice addition to it. The quality is decent, although it is steel and not brass. Does come with adapters to fit any typical bench grinder.For DIYer or pro who needs to occasionally smooth a weld or surface or remove rust, this should do the trick. For someone who does this on a daily basis, there are higher end options available.It’s reasonably well balanced and can handle up to 4500 rpm which is more than enough for my bench grinder.
Virgil Streich (verified owner) –
well made, has maple fittings for multiple bore sizes.