Wiss 9.75 in. Straight-Cut Bulldog Snip
$15.97
Cut straight on a wide range of sheet materials like plastic, rubber, canvas, cloth or cardboard with this Wiss Bulldog Aviation Snips.
In stock
Description
The WISS Metalmaster® bulldog snips are used for notching or trimming extra heavy stock. The non-slip serrated jaws are made from molybdenum steel for compound lever action. They withstand strain of cutting heavy stock and tight curves. They have spring action for quick, effortless feed. They cut low carbon cold rolled steel. The M5R is 9-1/4 In. long.
- For notching or trimming extra heavy stock
- Non-slip, serrated jaw made of tough molybdenum steel
- Withstands strain of cutting heavy stock and tight curves
- Spring-action for fast, effortless feed
- Handy hang-up hole
- Cuts low carbon cold rolled steel
- Blade designed for cutting tight curves and heavier stock
Additional information
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 1.03 × 2.85 × 11.40 in |
| Blade Length (in.) | .875 in |
| Blade Material | Steel |
| Blade Width (in.) | 1 |
| Features | No Additional Features |
| Hand Tool Type | Snips/Sidecutters |
| Handle Length (in.) | 4.5 |
| Handle Material | Comfort Grip |
| Individual/Set | Individual |
| Model | M5RL |
| Number of Pieces | 1 |
| Product Length (in.) | 9.25 |
| Rolled Steel Gauge Cutting Capacity | 16 |
| Snip Type | Bulldog Snip |
| Tools Product Type | Hand Tool |
Reviews (54)
54 reviews for Wiss 9.75 in. Straight-Cut Bulldog Snip
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 20-045
Cutting Tools
Model# 122100R
Cutting Tools
Model# 2100-9
Cutting Tools
Model# 2100-8
Cutting Tools
Wiss 9-3/4 in. Compound Action Straight and Right Cut Aviation Snips
Model# M2RS
Cutting Tools
Stanley 27.75 in. Adjustable Angle Clamping Miter Box with 22 in. Saw
Model# 20-800
Cutting Tools
Model# M6RS
Cutting Tools
Model# 63324
Shanel Langworth (verified owner) –
Great tool at a great price. Well made. Ordering online made purchasing easier
Carson Osinski (verified owner) –
Excelent service
Emiliano Wilderman (verified owner) –
Work exactly as named/described… like a bulldog through a chew toy.
Orval Wunsch (verified owner) –
Just perfect for any gauge 16 and up.
Clare Kertzmann (verified owner) –
They were exactly what I needed to get the job done
Hudson Miller (verified owner) –
I would rate these snippers “poor” for the purpose they were purchased: cutting a chain link fence. They were recommended for this purpose but didn’t even dent the fence. They were returned the next day.
Wilhelmine Hahn (verified owner) –
WORKS JUST LIKE IT WAS SUPPOSED TO.
Kadin Kuphal (verified owner) –
They cut through hardware cloth very easily.
Maeve Gottlieb (verified owner) –
Cuts 3/32” insulated cable wire very good
Adell Christiansen (verified owner) –
cuts metal like butter
Celine Braun (verified owner) –
Wiss bulldog snips are great
Kiana Leannon (verified owner) –
Tthis tool was exactly what was needed to get the job done.
Karson Romaguera (verified owner) –
I needed to cut several hundred pieces of wire. These cutters performed as advertised from the first cut to the last. The blades appeared to be as sharp as when I took it out of the package.
Gaetano Barton (verified owner) –
TOUGH DURABLE SNIPS !
Astrid Wolff (verified owner) –
Had a pair of these for years and I finally lost them on the job. Went to buy a replacement pair but Home Depot was out so I purchased a set of the most expensive straight Wiss snips. They don’t have the cutting power of the “M-5’s” and they redesigned the mechanism to hold the tool closed which I dislike. I’m an electrician so I don’t have to make long cuts in sheet metal but for cutting flexible metal conduit and heavier gauge metals this product is ideal.
Mohammad Muller (verified owner) –
The nose section is short so it can really cut through thicker metal because of the extra levrage. These are straight cut so don’t curl the metal on either side. This makes them somewhat difficult to make long cuts, just like any straight cut snips. The steel used for the cutting edges is really sharp.
Eriberto Lowe (verified owner) –
Accurate details on delivery and easy pick up and good proce
Furman Jones (verified owner) –
Would definitely buy these again. They will out perform the others when it comes to tough cuts!
Jayde Mertz (verified owner) –
I use it for cutting drop ceiling frame work. the short nose lets me into tight spaces
Hassie Romaguera (verified owner) –
I’ve had an older pair of this short style snips and lost’em so I replaced them with these and I am here to say these are very disappointing. They say they cut to 16 Gauge but that is not so as they barely cut 20 Gauge Material, Aluminum at that. They seemed a bit too bulky and this new head design dose not reach the tight sports that the former did with ease. The seem to be made with quality materials but for their price they are NO BARGAIN. They boost of having a flat joint but I saw no real benefit to it as it made the actual blades much wider. The cut was horrible and I could not cut an Aluminum transition strip, there just seemed to be no real leverage. My former pair cut this transition strip like cardboard but these snips failed so I returned them.