Worx 4-Volt Lithium-Ion Semi-Automatic Driver
$44.70
Cock this pistol-like tool to instantly select one of six screwdriver heads that locks into place, ready for action. The Worx 4-Volt semi-automatic driver comes with two revolving cartridges, each of which can hold six screw-driving bits. A reversible motor allows you to turn screws clockwise or counterclockwise, while a locked setting allows you to drive screws manually. Illuminate your work space with a front-facing LED light and approach hard-to-reach corners with an off-set head.
In stock
Description
Cock this pistol-like tool to instantly select one of six screwdriver heads that locks into place, ready for action. The Worx 4-Volt semi-automatic driver comes with two revolving cartridges, each of which can hold six screw-driving bits. A reversible motor allows you to turn screws clockwise or counterclockwise, while a locked setting allows you to drive screws manually. Illuminate your work space with a front-facing LED light and approach hard-to-reach corners with an off-set head.
- Includes: (1) 4-Volt semi-automatic driver, (1) AC adapter, (1) built-in rechargeable lithium-ion battery, (11) screw-driving bits and (1) pilot hole/screw-starter drill bit
- Rubber, contoured grip designed for maximum comfort, balance and stability
- 27 in. lbs. of maximum torque
- 230 RPM maximum (no-load speed)
- 3-year limited warranty
- LED light means no more working in the dark
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2.250 lbs |
|---|---|
| Dimensions | 10.85 × 2.25 × 6.50 in |
| Battery Amp Hours | 3 Ah |
| Drill/ Driver Type | Drill/ Driver |
| Tools Product Type | Power Tool |
| Power Tool Features | Keyless Chuck, LED Light |
| Number of Total Batteries Included | 0 |
| Motor Type | Brushed |
| Model | WX254L |
| Maximum Speed (RPM) | 230 RPM |
| Included | Bits Included |
| Cordless/ Corded | Cordless |
| Battery Power Type | Lithium Ion |
| Cordless Tool Type | Drill/Driver |
| Condition | New |
| Color Family | Black |
| Chuck Type | Hex |
| Chuck Size | 1/4 In. |
| Charger Included | Charger Included |
| Battery/Charger | Tool Only |
| Battery Size | 4-volt |
| Voltage (volts) | 4 |
Reviews (98)
98 reviews for Worx 4-Volt Lithium-Ion Semi-Automatic Driver
Only logged in customers who have purchased this product may leave a review.
Related products
Drills
DEWALT 7.8 Amp Corded 1/2 in. Variable Speed Reversible Hammer Drill
Model# DW511
Drills
Milwaukee 7.5 Amp Corded 1/2 in. Pistol Grip 2-Speed Hammer Drill
Model# 5378-20
Drills
Model# 11263EVS
Drills
Milwaukee 13 Amp Corded 1/2 in. Super Hawg Hole Hawg Right Angle Drill Driver
Model# 1680-20
Drills
Model# DW130V
Drills
Model# 0299-20
Drills
Model# 11245EVS
Jasmin O’Connell (verified owner) –
This is great – something I really needed so thanks. Works very well and great design.
Santos Wehner (verified owner) –
Such a handy device. Also never looking for screw tips is a major plus!! It has lots of torque too.
Maribel Borer (verified owner) –
This is my go-to tool. Very handy and it’s the only screwdriver I ever need thanks to the easy to change built-in heads. As a single woman who tries to tackle many projects on my own, this helps me get things done. And it stays charged forever!
Carmel Kassulke (verified owner) –
The drill is extremely helpful and easy to carry it does everything a set of screwdrivers do and more definitely a great buy
Adam Mayer (verified owner) –
Happy with it so far. Well made, easy to use, good power.
German Greenfelder (verified owner) –
I have not had a chance to use this item yet but I am anxiously looking forward to the opportunity.
Margot Auer (verified owner) –
I’ve had the WX254L for a few days now. It does everything I hoped it would; but, it’s not perfect. I’d award 4.5 stars if I could. If I were redesigning it, I would tweak the following:1) Delay the shutoff of the light for about 5 seconds allowing use in darkness without guess work. A double switch that activates the light before the drive mechanism would work too; but, would probably add more to the cost and be a little trickier to operate given the SD driver’s size.2) Orient the light so that it shines with its center on the tip of the bit. With mine, the bit is at the very top edge of the lighted area.3) Magnetize the bits for improved control with steel screws. They’d collect metal debris that would need to be cleared occasionally; but, I’d prefer that over not being able to easily drive screws with one hand. 4) Figure out a way to store the second cylinder of bits on-board. Doing so while maintaining the same form factor might be difficult; but, it looks to me like a second cylinder could be stored under the back side of the slide. Being able to rack the slide to change bits has a definite “cool” factor; but, (if I had to) I’d forego that to have the second cylinder handy. Allowing the cylinder to be turned manually in either direction would also be desirable.5) Include a 3-inch extension that can be inserted in the handle of the driver, behind the battery.6) Slightly increase the size of the larger slot-head bit to 3/16″.7) Instead of item 6 (above), add cylinders to include a more complete assortment (and diverse sizes) of bits. Obviously, storing three or more cylinders on-board wouldn’t be practical; but, people could better customize the on-board cylinder(s) to meet their individualized needs. Even a third empty cylinder would be an improvement.Looking back at all of my tweaks suggests that I’m not happy with my new driver. Nothing could be further from the truth. I see using it just the way it is for years to come.
Lorine Mayert (verified owner) –
I had previously bought this for my husband and both he and I found how great it works especially for small projects. I actually just bought one for my son-in-law fir Father’s Day because he liked using my husbands so much
Roman Ziemann (verified owner) –
I love this tool, it helps get the job done quick. I also just bought a switchdriver, which is great also!
Lottie Stiedemann (verified owner) –
It’s a good product. I have used it a couple of times and has worked good. It is not a heavy duty screw driver and I wouldn’t use it to put up dry wall but for small jobs it is real handy.
Hannah Adams (verified owner) –
Independent Lady Loves this product. No frill/complications. Just convenient and easy to use.
Heather Kertzmann (verified owner) –
holes a charge longer than I seen any other cordless tool
Travis Johnston (verified owner) –
This is the 2nd one I’ve purchased. Used it a lot working on my daughters home. She liked it so much I bought one for her. It’s easy to use and very powerful. Never have to look for different type screw drivers. This driver has every type needed at the slide of the top.
Miracle Heidenreich (verified owner) –
I bought a couple years ago, great for small jobs. theyre not kidding about this thing holding battery. I left it in my tool box and didnt touch it for almost two years, pulled it out the other day and it didnt miss a beat. been using it for the past two days and still havent had to charge it.
Jessy Schaefer (verified owner) –
This is my second cordless screwdriver. I used the first one for several years until I wore it out.
Jerome Fahey (verified owner) –
Carlos Barrows (verified owner) –
She has hinted to wanting something like this. This fits the bill.
Natasha Barton (verified owner) –
I love this drill for lightweight applications. It looks like there are metal contacts at the bottom for a base charging station. Is it possible to purchase one of those, instead of having to use the plug?
Keara Nader (verified owner) –
the drill is great,easy to handle. this is my second one i get. The sad part is that this time around it came in a package rather then in a box that help store it with the extra bits and charger. the first time did. this time didnt.
Bernita Fahey (verified owner) –
Bing able to have the bits you need that handy is a time saver