Xcellon 4-Port Slim USB 3.1 Gen 1 Type-A Hub
$7.49
In stock
Description
Expand your system’s connectivity with the Xcellon 4-Port Slim USB 3.1 Gen 1 Type-A Hub. With four USB Type-A ports, this hub can be used to connect a variety of peripherals such as flash drives, keyboards, and more. Adhering to USB 3.1 Gen 1 standards, it has data transfer rates of up to 5 Gb/s, so you can spend less time waiting and more time getting things done. Moreover, its slim design makes it easily pocketable for use on-the-go.
Note: This USB hub supports data transfer only. It will not deliver power to devices.
Additional information
| Weight | 0.13 lbs |
|---|---|
| Dimensions | 6.6 × 2.6 × 0.6 in |
| USB | 4 x USB 3.1 / USB 3.2 Gen 1 Type-A |
| System Connection | 1 x USB 3.1 / USB 3.2 Gen 1 Type-A Male |
| Connection Type | Integrated Cable |
| Power Source | Bus Powered |
| Cable Length | 5.9" / 14.99 cm |
| LED Indicator | Connection |
Reviews (222)
222 reviews for Xcellon 4-Port Slim USB 3.1 Gen 1 Type-A Hub
Only logged in customers who have purchased this product may leave a review.
Related products
Cable Accessories
Smart-AVI USB2Pro USB 2.0 over CAT5 Extender Link with Power Supply
Cable Accessories
Cable Accessories
Cable Accessories
Cable Accessories
Cable Accessories
Cable Accessories
Chanelle Johns (verified owner) –
I have this connected to a Mac Mini and connecting USB 3.0 card reader, USB 3.0 Samsung portable SSD and LaCie USB 3.0 portable external hard drive and can have all plugged in at once.
Gerhard Schmeler (verified owner) –
Works like a charm
Xavier Durgan (verified owner) –
works perfectly..
Amara Wuckert (verified owner) –
This usb hub works perfectly with my Mac.
Mossie Pollich (verified owner) –
Much needed and works a treat with the MacBook.
Lucienne Jakubowski (verified owner) –
Perfect for adding USB ports.Im an amateur photographer and have multiple drives for backup.Highly recommended!
Robert Walker (verified owner) –
I am using Tether Tools USB3 active extensions and a Tether Tools USB3 Tether Boost Core Controller, connected as per their instructions, to reach this hub 32 ft away, into which I have a camera, a mic, and a serial port connected. In this configuration, the hub does not reliably work, even with the Core Controller powered or unpowered, and even trying the older 4 port Core Controller, powered and unpowered. But when I substituted the hub with a BlackWeb USB3 hub from Walmart, everything works reliably. At short distances, the hub appears to work fine, so I won’t claim it’s defective, but I don’t know what it is about it that causes problems tethered, where a different hub does not, but there it is.
Waylon Lynch (verified owner) –
I had a USB 2 device needed its own separate power. Wow. this cut down by half my junk in my bag.
Myrtice Kiehn (verified owner) –
We had a hub that connected with a thin floppy wire. The connector on this portable USB hub is so much sturdier. Seems to be working great.
Adrian Kuhic (verified owner) –
i like it
Casey Torphy (verified owner) –
Expansion to latest iMac that will never have enough ports to take care of legacy equipment that have to work with a new computer.
Adolfo McCullough (verified owner) –
Works as described. An indisputable ‘Best Seller’.
Trever Torp (verified owner) –
Does what it is supposed to do and is a great value.
Magali Moore (verified owner) –
So I’m not sure what’s going on with this hub. I have an elgato and it requires a USB 3.0 connection. I specifically purchased this hub to connect my elgato external video capture card. However, upon connecting the video capture card, it didn’t work and the message says I need to disconnect all hubs because a USB 3.0 connection is required. So I don’t get it. I don’t know if this USB hub is truly 3.0.
Vernon Stroman (verified owner) –
I bought this hub to hook up four external hard drives at once. I hooked everything up the first time and it worked great. That is, until I ejected a drive. I went through the normal procedure of ejecting the drive from my mac, but when I unplugged the drive from the hub, all of my drives on the hub were disconnected from the mac. I got three warnings that the disks had been improperly ejected, even though they were all still very much connected. This problem persists, so I am unable to swap out drives mid-stream, so to speak. This is limiting and unnecessary. The build quality seems fine, and as long as I don’t try to swap out drives one at a time, it does its job admirably. But that ejecting problem is a deal breaker.
Gardner Hodkiewicz (verified owner) –
Well made and slim. Fit the bill for what we were doing with it to combine various devices with great speeds through the hub.
Jeanette Jerde (verified owner) –
It works fine with my MacBook Pro.
Kobe Abshire (verified owner) –
Works good, the only drawback is that the cord is just a few inches too short to be used on anything but a laptop.
Herminia Welch (verified owner) –
Simple, compact, and to the point. This dock is perfect for any Apple computer.
Terrill Beer (verified owner) –
Stopped working after few usages