XtremepowerUS Industrial Circular Saw is Compact and lightweight, quickly cuts through all 2X material. 14 in. circular saw has a powerful motor and 4300 RPM. Ergonomic control grip allows easy operation. Built-in dust port help keeps cutting area clear of debris.
- Circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
- Double protection switch prevents the machine from accidentally opening, promises a safer cutting job
- 15 Amp motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease
- Used wet or dry, the dual integrated dust management system takes the dust out of the job
- Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line, the metal guard design to prevent the hurt from spark when operating
- For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life, also comes standard with GFCI built-in the cord
- Material: ABS plastic, steel
- Power: 2,800-Watt
- Voltage: 120/60 Hz
- No load speed: 4,300 r/minimum
- Blade diameter: 14 in.
- Adjustable angle: yes
- Dust port: yes
- Blade included: no
- Water line attachment: yes
- Maximum cutting depth: 5 in.
- Guide roller: yes
- Overall dimension: 30 in. L x 10 in. W x 16-3/4 in. H
Oswaldo Gaylord (verified owner) –
I just got my saw today and was surprised at the high quality of the saw and how fast It cuts. I bought a Hilti blade for it. I did however find it odd that the manual said NOT to use it with water or coolant on page 6 and 10 of the manual. I ignored this and hooked up the water pump that comes with it. It pumped a decent amount of water. There was a problem with the shutoff valve leaking around the knob a lot when it was in the on position. I will be contacting them for a replacement. Other then that its a great purchase.
Lionel Kerluke (verified owner) –
The saw worked perfectly!! We cut in a basement with the wet system on and had almost no dust. It does draw a lot of power though. We tripped a 20amp breaker several times, while cutting, but we were cutting full depth so Im not surprised. Good tool, well worth the money.
Lauretta McCullough (verified owner) –
Used it for concrete and asphalt driveway.amazed how much power it has very little loss of power under extreme load.water feature is great and a must have. Very well built saw.
Justen Bechtelar (verified owner) –
Cut through a 4″ thick sidewalk in 3 passes with ease. Two cuts 6 inches apart so I could but in a 4″ drain pipe for a downspout to get the water further away from the house and not have a frozen sidewalk in the winter. Never bogged down. Will use it again to run a water line to install a frost free hydrant. If you have more than one project that can’t be done in the same day (which I have 3), you will save over renting.